Top-to-bottom centering is at the edge of tolerance, and left-to-right is as well. If ruled in favor of the client, the grade would be 9.5 (50/50 one way and 55/45 the other); otherwise, it would be 8 (as a 9 requires 55/45 both ways).
02Corners Assessment9.5
Uneven cutNo wear
Uneven cutWear
Even cutNo wear
Even cutNo wear
Comment
The corners of the card are good but not perfectly cropped, with slight wear on the top right corner.
03Edges Inspection8
Edge
White Spots
Count
Top
Yes
7
Bottom
No
0
Left
No
0
Right
Yes
5
Proof Images
Microscope TR corner
Microscope Top
Microscope Top
Microscope Right
Microscope Right
⚠ Disclaimer
We do not guarantee detection of all edge imperfections. Microscopic analysis is limited by magnification and lighting.
Comment
Well-cropped. Minor wear on the top and right edges, with a visible small chip on the right side of the card.
04Surface Analysis9
Is bent?No
◆ Front
Defect Type
Found
Details
Scratches
Yes
Tiny, Slightly noticeable
Print Lines
Yes
Barely noticeable, likely will not affect the grade.
Dents
No
—
Surface Dust Marks
No
—
Factory Defects
No
—
Proof Images
Microscope Printlines
Microscope Scratch or damage
⚠ Disclaimer
We do not guarantee detection of all surface imperfections. Analysis conducted under controlled lighting; BGS conditions may differ.
Comment
The back of the card was not examined.
Overall Pre-Grade Estimate
8 – 8.5
Better to keep in raw
Medium–High
Small chips on the right side of the card, centering at the edge of tolerance.
⚠ Global Disclaimer
This report is a preliminary expert opinion and does not guarantee Beckett (BGS) final grading results. Grades assigned herein are estimates based on microscopic analysis conducted under laboratory conditions and may differ from official BGS scores. Microscope analysis may not detect all defects. The client assumes full responsibility for submission decisions.